Hi-Fi Classics Reborn
System 7
The System 7 is a high-quality 3-way bass-reflex loudspeaker system designed for medium to large rooms. It delivers a neutral tonal balance, controlled directivity, and extended low-frequency performance, making it ideal for both critical listening and everyday enjoyment.
Angled stands ensure that the speaker’s acoustic axis is perfectly aligned with the listener’s ears at an optimal distance of 2.5 to 3.5 meters, enhancing imaging and clarity. Finished in natural wood veneer, the System 7 combines refined acoustics with premium craftsmanship, offering both exceptional sound and elegant design.
The Speaker That Mimics Nature
System 7 employs a controlled directivity design that shapes the loudspeaker’s dispersion pattern in a way that closely resembles how natural voices and acoustic instruments project sound. Through a combination of cabinet geometry, carefully chosen crossover points, and a precisely engineered wave-guided tweeter, the directivity gradually narrows as frequency increases.
This reduces the level of high-frequency reflections in the room and preserves the clarity of direct sound reaching the listener. The result is a presentation free from the artificial brightness and listening fatigue often caused by uncontrolled dispersion, allowing music to retain its natural focus and realism.
A Stage You Can Step Into
In System 7, midrange clarity is achieved by isolating the spectrum’s most sensitive region from heavy low-frequency demands. Free from deep-bass excursion, the midrange driver maintains precise pistonic motion with significantly lower intermodulation artifacts.
The cabinet’s wide baffle and the driver’s deliberate off-center placement further suppress diffraction, enabling smoother dispersion and a more expansive listening window. This gives the midrange reproduction a natural openness and a well-defined, immersive stage.
Crafted for Performance, Built to Last
The enclosure of System 7 is built to control resonance at its source. A thick 25-mm baffle, reinforced internal bracing, and cotton-wool damping work together to suppress vibration and manage internal pressure, keeping the cabinet acoustically silent. Its tuned bass-reflex port seamlessly integrates with a vented motor woofer to achieve low-frequency reach and high output levels without strain or compression.
All drivers are dedicated to their specific frequency roles and are fully manufactured in Denmark and Poland, using textile and paper materials selected for their natural acoustic behavior. Precision copper coils, film capacitors, and wirewound resistors complete the crossover, ensuring both accuracy and durability.
Technical Specifications
| Design | 3-way bass reflex |
| Tweeter | 1-inch wave-guided textile dome |
| Midrange | 5-inch modified cellulose cone |
| Woofer | 10-inch modified cellulose cone |
| Frequency range (-6 dB) | 40 Hz – 20 kHz |
| Typical in-room bass response (-6 dB) | 36 Hz |
| Crossover frequency | 400 Hz, 2.5 kHz |
| Nominal impedance | 8 Ohm |
| Amplifier requirements | 35–200 W |
| Sensitivity (2.83V/1m) | 85 dB |
| Maximum SPL | 108 dB |
| Weight | 25 kg |
| Dimensions (H × W × D) | 700 × 330 × 327 mm |
| With stands and terminals | 740 × 330 × 355 mm |
Frequency Response
Measurement conditions:
- The reference axis is the tweeter’s center
- Tests conducted with grilles off
- 2m distance from the loudspeaker
- Sensitivity adjusted to 2.83V/1m